Irrigation Kit for
Minigarden Vertical

Water your entire vertical garden at one time!

Irrigation Kit for Minigarden Vertical

With the Irrigation Kit for Minigarden Vertical, you won’t have to individually water each plant in your green wall.

The Minigarden Irrigation Kit is a drip-watering system specially designed to irrigate up to nine Vertical modules (or three Vertical sets), holding a total of 27 plants. The Kit is simple and intuitive to install, and can be connected to a manual sprayer or electric pump for easy water delivery.

Each Minigarden Vertical Irrigation Kit includes:

  • Nine 25 ½” micro dripping tubes
  • Eight 7” micro dripping tubes
  • Three 1 ½” micro dripping tubes
  • One 59” micro dripping tube
  • All coupling, joints, plugs, valves, and connectors for any configuration
  • Detailed, easy-to-follow instructions for installation

 

For larger installations, you can connect a total of three Irrigation Kits to water a total of 81 plants. The Irrigation Kit for Minigarden Vertical can also be combined with the Irrigation Kit for Minigarden Corner for use in any vertical garden configuration.

When Should you Use an Irrigation System?

The Minigarden Irrigation System is ideal for:

  • Larger greenwall installations, with anywhere from 27-81 plants
  • Urban and commercial installations
  • Low-maintenance vertical gardening – use a manual sprayer or connect your Irrigation Kit to an electronic pump so you don’t have to water each plant individually

Create the perfect urban green wall for your space with Minigarden

Learn More

The easiest way to water larger vertical gardens installations.

Buy Now

How To Connect Irrigation Kit to a Hand Sprayer

Step 1

Ensure that your hand sprayer has the correct connections to attach the microtube. The hand sprayer should accommodate a 4mm interior diameter and 6mm exterior diameter. To ensure it fits properly, bring the Minigarden microtube to your gardening center or hardware store to test with hand sprayer.  

Step 2

Remove the threaded nut and o-ring from the wand included with the hand sprayer.

Step 3

Insert the threaded nut over the end of the 150 cm micro tube that will be attached to the hand sprayer.

Step 4

Insert the o-ring below the threaded nut.

Step 5

Insert the micro tube into the flow control. Ensure the o-ring is near the connection to prevent leaks.

Step 6

Thread the nut over the flow control. Tighten well by hand.

Step 7

Pump the hand sprayer and press the flow control to start irrigating.

 

 

 

 

 

 

The Flo-Master 2 gallon Heavy Duty hand sprayer integrates perfectly with the Irrigation Kit for Minigarden Vertical.

Learn More

Each Irrigation Kit for Minigarden Vertical contains:

  • Nine x 25 ½” micro dripping tubes.
    • Internal tube diameter: 3/16”
    • Exterior tube diameter: ¼”
    • Distance between drip feeders is 8”
    • Flow rate is 51 oz/h
  • Eight x 7” micro tubes
  • Three x 1 ½” micro tubes
  • One x 59” micro tube
    • Internal tube diameter: 5/32”
    • Exterior tube diameter: ¼”

Downloads

Buy Online

Water your entire Minigarden in minutes using our specially designed irrigation kits.

Shop Now